Install Vent Covers; Complete Installation - KitchenAid KXW4436YSS Instructions D'installation Et Guide D'utilisation Et D'entretien

Install Vent Covers

When using both upper and lower vent covers, push lower cover
down onto hood and lift upper cover to ceiling and install with (2)
4 x 8 mm screws.
NOTE: For vented installations, upper vent cover may be
reversed to hide slots.
C
D
A. Upper vent cover
B. Lower vent cover
C. 4 x 8 mm screws
D. Bracket
10
Secure the bottom of the duct with (2) 4 x 8 mm assembly
screws.
A

Complete Installation

1. For non-vented (recirculating) installations only, install
B
charcoal filters over grille on blower housing. See the "Range
Hood Care" section.
2. Install metal filters. See the "Range Hood Care" section.
3. Check the operation of the range hood blower and light. See
the "Range Hood Use" section.
NOTE: To get the most efficient use from your new range hood,
read the "Range Hood Use" section.