Atlantic 2012 Série Notice D'utilisation Et D'installation page 22

To activate the 2h Boost function outside the set hours for the 24h Auto function, press for approx.
second the mode selection wheel a.
Light B comes on. The heating light C is lit.
Your device operates at maximum power for 2 hours and then returns to normal operation (the same
as when set to ON).
You can switch off this function before the two hours have expired by holding down wheel A for approx.
second.
To switch off the 24h Auto function, change the position of the mode selection wheel a.
Your device resumes normal operation at the end of the cycle started (the light stays on B until the end
gB
of the cycle).
To stop the cycle immediately, turn the wheel a to oFF.
The 24h Auto function is deactivated.
heating and drying towels: how to use the 24h auto drying function.
To activate the 24h Auto Drying function, set the mode selection wheel a to .
Light B comes on.
Your device operates at medium power for 2h 15 min and then stops heating (the device remains ON).
You can deactivate the function at any time with a -second press on the selection wheel A.
The 24h Auto drying function will repeat the cycle every day of the week at the same time.
The second time that the 24h Auto drying function starts up will be the following day, 45 minutes
before the time programmed when you first activated the function and then at the same earlier time
every day of the week.
example of use:
You wish to have warm towels at 7 AM.
On the first day, at 7AM, set the mode selection wheel a to . Your device starts to heat at medium
power for 2h 15 min and then stops (it remains ON).
On the following day and the days thereafter, your device starts to heat at medium power at 6:15 AM
to heat your towels for 7 AM and then dry them afterwards until the end of the 2h 15 min period.
To activate the 24h Auto Drying function outside the programmed time, hold down the mode selec-
tion wheel a for 1 second.
Light B comes on.
Your device operates for 2h 15 min and then stops heating.
You can deactivate this function at any time before the 2h 15 min period has expired by pressing the selection
wheel A.
To deactivate the 24h Auto drying function, change the position of the mode selection wheel a. Your
device resumes normal operation at the end of the cycle started (the light stays on B until the end of
the cycle).
To stop the cycle immediately, turn the wheel a to oFF.
The 24h Auto Drying function is deactivated.
21