Atlantic 2012 Série Notice D'utilisation Et D'installation page 21

Switching on and finding the right heating temperature
The device is designed to provide the heat and comfort you require in
your bathroom.
To switch on your device, position the mode selection wheel a to
on.
To set the device to standby mode, set the mode selection wheel a to
oFF.
Position the temperature setting wheel d to . The heating light C
lights up if the ambient temperature is less than that displayed.
Wait at least 6 hours for the temperature to stabilise.
If you are dissatisfied with the room's temperature, set the tempera-
ture setting wheel d to .
how to raise the room's temperature quickly : use of the 2h Boost function.
To activate the 2h Boost function, set the mode selection wheel a to on; then hold down wheel a
for approx. 1 second. If you press the wheel for too long, you risk locking the settings (see page 21).
Light B comes on. The heating light C is lit.
Your device operates at maximum power for 2 hours and then returns to normal operation (heating
the room to the temperature you have chosen).
To switch off the 2h Boost function (before 2 hours have expired), hold down wheel a again for approx.
second.
Light B goes out.
Your device resumes normal operation.
how to raise the room's temperature quickly every day : how to use the 24h
auto heating function.
To activate the 24h Auto function, set the mode selection wheel a to .
When you activate the 24h Auto function, the 2h Boost function comes on.
Light B comes on. The heating light C is lit.
Your device operates at maximum power for 2 hours and then returns to normal operation (the same
as when set to ON).
You can switch off this function before two hours have expired by holding down wheel A for approx. second.
The 2h Boost function comes on for a second time the following day 45 minutes before the program-
med time for the initial start and then at the same time every day of the week.
example of use :
You wish to have your optimum comfort temperature at 7 AM.
On the first day, at 7AM, set the mode selection A to .Your device starts to heat at maximum
power for 2 hours and then resumes normal operation after 2 hours.
On the following day and the days after, your device will heat at full power at 6:15 AM to provide your
comfortable temperature at 7 AM.
20