Abus Profiline GSM-Interface Guide D'installation Et D'utilisation page 46

11.4 Contact management
With the following command, you can change the numbers of the 8 available
contacts.
Command
FMPHONE / NEW
Change or create the telephone number
of a contact.
11.5 Diagnostics
If you send the following commands, you receive a reply by SMS about the various
system states.
Description of command
STATUS
Status of mains voltage, battery,
telephone line and GSM signal strength
SI
Status of inputs
SU
Status of outputs
11.6 Date and time
Command
CLK
Reply by SMS about device date and
time
CLK
Change of device date and time
11.7 SIM management
Command
CR
The device tells you the current credit
level.
RESETSIM
After renewing your SIM, send this
command to reset the SIM expiry date.
SMS structure
"CODE" "FMPHONE" "contact number"
"NEW"
Example: 1234 FMPHONE 2 NEW
021123456
SMS structure
"CODE" "STATUS"
Example: 1234 STATUS
"CODE" "SI"
Example: 1234 SI
"CODE" "SU"
Example: 1234 SU
SMS structure
"CODE" "CLK"
Example: 1234 CLK
"CODE" "CLK" "dd/mm/yy,hh,mm"
Example: 1234 CREDIT
01/06/2008,18,30
SMS structure
"CODE" "CR"
Example: 1234 CR
"CODE" "RESETSIM"
Example: 1234 RESETSIM
22