Panasonic TY-ST85P12 Manuel D'installation page 7

Assembly
2. Slip the left and right supports  onto the poles
of stand base  from the top so that the display
mounting fixtures  face the front.
3. Mount the 4 support mounting hexagon bolts
 onto the support  from the back.
Affix them securely from the front with flanged
cap nuts  .
•
The bolt and nuts should be securely tightened
to the torque given below.
(12~14 N•m)
3. Preparation and installation of plasma display
Caution
•
The plasma display is heavy so use a device (machine) that will
enable the plasma display to be lowered in place.
•
The controls of the plasma display panel are located on the right
side panel so ensure that they are not bumped into or knocked
during the installation process.
•
Make sure that the stand hooks are firmly secured.
1. To lift the plasma display, connect the suspension device's
hook to the eye bolt in the center of the plasma display.
18
Display mounting fixtures 
Front
Stand base 
Flanged cap nuts 
Front
Supports 
Rear
Support mounting hexagon
bolts 
Stand hooks