Panasonic TY-ST85P12 Manuel D'installation page 10

2. As shown in the figure, insert the light shield 
between the plasma display main unit and support
 .
3. Align the holes in the back cover of the plasma
display used by the screws which were removed in
step 1 with the holes in the light shield  .
4. Fasten the light shield  and back cover together
using the 3 back cover mounting screws which were
removed in step 1.
•
The screws should be securely tightened to the torque
given below.
(1.2~1.5 N•m)
Side view
Light shield 
（Nonwoven fabric side)
5. Mount the light shield  onto the stand base 
using the 5 light shield mounting screws  .
•
The screws should be securely tightened to the
torque given below.
(1.2~1.5 N•m)
When the touch panel is used
Light shield 
（Nonwoven fabric side)
Supports 
Light shield （Nonwoven fabric side)
Back cover mounting screws
Light shield 
Holes used when
the touch panel is used
Light shield mounting screws 
21