Use Of The Advanced Remote Control - Vortice VORT LETO MEV Notice D'emploi Et D'entretien

ENGLISH
As soon as you have completed the procedure, you
are advised to check that the units are synchronised,
for example, by changing the speed setting.
If this fails, repeat the procedure.
A remote control unit can be replaced at any time by
following this synchronisation procedure.
In the event of multiple installations, the same syn-
chronisation procedure can be carried out on all the
appliances, that, in this case will have just one re-
mote control unit.
Use of the Advanced Remote
Control
Appliance/Remote Control Coupling
Each remote control must be initialised before use.
This activity is entrusted to the installer (for remote
controls sold separately from the product), or factory
set (for remote controls sold with the product).
The activity comprises the following steps:
a. turn the power off for at least 30 sec.;
b. turn the power back on;
c. within 60 sec. perform the procedure described
below.
In detail, holding down the ENTER key for at least 3
seconds, the appliance will couple with the remote
control. Completion of coupling will be confirmed by
an acoustic signal (constant 5 second BEEP) from the
remote control itself.
As each remote control unit is being synchronised,
any settings made to the appliance up to that time are
automatically transferred to the remote control.
Still repeating the same sequence, each appliance
may be coupled to several remote controls, to allow
the user to operate the appliance by means of several
remote controls, situated in different rooms in the
home, or to allow the replacement of a faulty remote
control.
Description of the Remote Control
(Fi.4)
4 4
T(°C) CO2(ppm) RH(%) O
88:88
Mo Tu We Th Fr Sa Su
DISPLAY
SET
All the functions of the appliance are managed
through the radiofrequency (RF) remote control. The
functions assigned to the various keys are the
following:
(To see their use check the "How to use the Remote
Control" paragraph):
• setting the initial values of Minimum and Maximum
Speed (to be performed by the Installer);
• enable/disable further variations to Minimum and
Maximum speed settings (for installer only).
• setting the mode of operation: Manual, Auto;
• setting the appliance operating speed, in the
Manual Mode;
•enabling and disabling (to be performed by the
Installer) the operating options available, by
introducing a pre-established and un-changeable
sequence of keys, that will force the appliance to
operate, continuously, in the AUTO mode; the user
can only set the TIMER function and change the
time or day of the week;
• setting the TIMER;
•display of relative humidity concentration values and
temperature in the served dwelling
•display of the time and date;
•display of the code for any appliance malfunction.
MAN
AUTO
SUMMER
TIMER MODE
NEXT ENTER
19