Ec Declaration Of Conformity; Important Information On Eco-Compatible; Disposal - Vortice Vort NRG 500 V Notice D'emploi Et D'entretien

ENGLISH
Unscrew the fastening knobs on the "Filter inspection
panel" and remove the panel.
Grip the handle on the filter, unfasten the clips holding
it, then pull downwards.
Recommended maintenance intervals :
Filter inspection: every 50/60 days;
filter replacement: from 4 to 6 months depending
upon the degree of pollution in the surrounding
atmosphere (dust, fumes etc).
N.B. Failing to clean or replace filters has a significant
effect on the efficiency of the system with:
- increased loss of load in the air circulation system
and reduced air flow;
- subsequent drop in system performance and in
comfort levels.

EC Declaration of Conformity

VORTICE ELETTROSOCIALI S.p.A
Strada Cerca, 2 - frazione di Zoate
20067 TRIBIANO (MI) - ITALY
declare that products
in the
VORT NRG range
conform with European Directives
2006/42/CE
•
• 2004/108/EC
in compliance with
EN ISO 12100-1 (2009)
EN ISO 12100-2 (2009)
EN 60204-1 (2006)+A1(2010)
EN ISO 13857 (2008)
EN 55014-1 (2006)
EN 55014-2 (1997) + A1 (2001)
EN 61000-3-2 (2006)
EN 61000-3-3 (2008)
All manuals and user guides at all-guides.com
Important information on eco-
compatible disposal
IN CERTAIN EUROPEAN UNION COUNTRIES THIS
PRODUCT DOES NOT
REQUIREMENTS
IMPLEMENTING THE RAEE DIRECTIVE AND, IN
THESE COUNTRIES, THE PRODUCT IS NOT
SUBJECT TO SEPARATE DISPOSAL OPERATIONS
AT THE END OF ITS WORKING LIFE.
This product complies with European Directive
2002/96/EC.
At the end of its useful life, the
product marked with the crossed
out wheeled bin
disposed of separately from
urban waste. It must be taken to a
differentiated disposal centre for
electrical and
appliances or be returned to the
retailer when a new equivalent appliance is bought.
Subject to current legislation on waste disposal, the
user is legally responsible for taking the appliance at
the end of its useful life to a suitable disposal centre.
Appropriate differentiated waste collection for
subsequent recycling, treatment and environment-
friendly disposal of the discarded equipment helps to
prevent possible negative environmental and health
effects and encourages recycling of the component
materials of the equipment.
For further information about available waste disposal
systems, contact your local waste disposal service or
the shop where you bought the product.
The manufacturers and importers comply with their
responsibility for
environmentally compatible disposal of waste both
directly and collectively.
FALL WITHIN
OF NATIONAL
must be
electronic
recycling, treating,
THE
LAWS
and
9