Vortice VORT LETO MEV Notice D'emploi Et D'entretien page 20

ENGLISH
How to use the Remote Control
Insert the batteries (fig.5);
5 5
BATTERIES
INCLUDED
IMPORTANT
After a certain period of inactivity, the remote control
will go into "pause" mode. To reactivate it, press and
hold down one of the buttons.
ON/OFF Button (fig.6)
6 6
14:38
DISPLAY
SET
Enables the appliance to be turned on and off. The
command is performed only if the button is pressed
for at least 0.5 seconds. With the appliance off the
time and day of the week are displayed. This
function may be disabled. On turning the appliance
on the AUTO mode is activated at a speed of V min
20
NOT
AA
Fr
TIMER MODE
NEXT ENTER
SET Button (fig.7)
7 7
14:38
DISPLAY
SET
Sets the following parameters. To move from one
parameter to the next, press NEXT.
Time/day setting (fig.7a):
7a 7a
14:38
Fr
• press SET to display the parameter
• set the value of the flashing field with the + and -
keys; to confirm and move to the next field, press
ENTER: the sequence is HOURS, MINUTES, DAY;
use the NEXT button to change from one operation
to another without changing settings;
• after you have changed the DAY setting and pressed
ENTER for 4 seconds, the display will automatically
return to the main screen.
AUTO
Fr
TIMER MODE
NEXT ENTER
O