AEG BSE778380B Notice D'utilisation page 134

9. After cleaning, install the glass panels
and the oven door.
If the door is installed correctly, you will hear
a click when closing the latches.
Make sure that you put the glass panels (
and ) back in the correct sequence. Check
for the symbol / printing on the side of the
glass panel. Each of the glass panels looks
different to make the disassembly and
assembly easier.
When installed correctly, the door trim clicks.
A B
Make sure that you install the middle panel of
glass in the seats correctly.
13. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
13.1 What to do if...
Problem description
You cannot activate or operate the
appliance.
134 ENGLISH
12.7 Replacing the lamp
Risk of electric shock.
The lamp can be hot.
1. Turn off the appliance and wait until it is
2. Disconnect the appliance from the mains.
3. Place the cloth on the oven floor.
Always hold the halogen lamp with a
cloth to prevent grease residue from
burning on the lamp.
Back lamp
1. Turn the glass cover to remove it.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300 °C
4. Install the glass cover.
Cause and remedy
The appliance is not connected to an electrical supply or it is connected in‐
correctly.
WARNING!
cold.
CAUTION!
heat-resistant lamp.
A
B