Publicité
Les langues disponibles
Les langues disponibles
Installation and Operating Instructions
CHAPTER 8
easyControls 3.0
SOFTWARE
Central ventilation unit – KWL 470 W/W ET
3. Double-click on the corresponding unit, cf. Fig. 34.
> The easyControls 3.0 controls open automatically via the web server in the web browser.
4. Configure unit settings, see chapter 8.1 „Menu overview", page 22.
ⓘ In order to operate the unit, the commissioning assistant must be complete, see chapter 6.2 „Run commissio-
ning assistant", page 16.
7.2
easyControls 3.0 cloud service
Users, service technicians or housing associations can change external unit settings or call up status information via
the easyControls 3.0 cloud service at any time. Registration with a username and password is required to use the ea-
syControls cloud service.
ⓘ The initial connection to the cloud service must take place via the local web server of the KWL
reasons.
The easyControls 3.0 cloud service is accessible via the website www.cloud.easyControls.net
ⓘ The KWL
unit must be connected to the internet.
®
7.3
Control element
The operating or control options for the KWL
(accessories) or the comfort control element KWL-BE Touch (accessories).
The installation, commissioning and detailed functional description can be found in the installation and operating inst-
ructions for the corresponding control element.
ⓘ A software update can be performed via the control element KWL-BE Touch.
7.4
Building control system
The KWL® unit can be integrated in a building control system network via the standard Modbus interface (RS 485) or
an optionally available KNX module KWL-KNX Connect (accessories).
ⓘ The associated operating instructions "KWL
www.HeliosSelect.de in the corresponding article.
•
8.1
Menu overview
easyControls 3.0 is the software for the smart and comfortable operation of the KWL
Settings can be configured in the following areas:
• Homepage (see chapter 8.2 „Homepage", page 22)
• Unit data (see chapter 8.3 „Unit data", page 24)
• Service menu (see chapter 8.4 „Service menu", page 24)
• Settings (see chapter 8.5 „Settings", page 25)
• Configuration (see chapter 8.6 „Configuration", page 25)
8.2
Homepage
8.2.1 Ventilation profiles
4 ventilation profiles can be selected or configured.
The ventilation profiles can be expanded via the
profiles can be selected for use.
ⓘ Sensors are only displayed if they are connected.
ⓘ The ventilation profile with the red background is always active .
AT HOME
Ventilation profile in the presence of persons.
The following parameters can be adjusted:
• Fan power
• Supply air
The target supply air temperature is adjusted here.
ⓘ T he maximum achievable target temperature is 2-3 °C below the extract air temperature without post-
heating (optional; available as accessory).
Fig. 34
unit can be extended via the slide switch control element KWL-BE Eco
®
easyControls Modbus" can be downloaded on HeliosSelect at
®
button and adjusted using the pen
22
unit for security
®
units via a mobile end device.
®
. The collapsed ventilation
EN
Publicité
