Publicité
Les langues disponibles
Les langues disponibles
Indications
Sirius ID*
2
SIRIUS
®
ID
Beep
Key-touch tone
Ext Input*
3
External input
Telephone*
4
Telephone muting
Amp Gain
Amplifier gain control
Color Sel
Color selection
Color Set
Red
Green
Blue
*
2
Displayed only when SIRIUS radio is connected.
*
Cannot be selected if the source is "CD-CH" or "EXT-IN."
3
*
4
Only for KD-AR860.
Selectable settings, [reference page]
The 12-digits SIRIUS identification number is shown on the display,
[38].
On: [Initial]; Activates the key-touch tone.
Off: Deactivates the key-touch tone.
Changer: [Initial]; To use a JVC CD changer, [14].
Ext In:
To use any external component (other than SIRIUS DLP),
[37].
Muting1/Muting2: Select either one which mutes the sounds while
Off: [Initial]; Cancels.
• If CD or CD changer has been selected as the source, playback pauses
during telephone muting.
You can change the maximum volume level of this receiver.
High PWR: [Initial]; Volume 00 – Volume 50
Low PWR:
Volume 00 – Volume 30 (Select this if the maximum
power of the speaker is less than 50 W to prevent them
from damaging the speaker.)
Off*
:
Deactivates the built-in amplifier.
4
[Initial: AllSource]; You can select your favorite display color for each
source (or for all sources), [33].
You can create your own colors, and select them for the display color,
[34].
Day Color:
User color during the day time*
NightColor: User color during the night time*
00 – 11 [Initial: Day Color: 07, NightColor: 05]
00 – 11 [Initial: Day Color: 07, NightColor: 05]
00 – 11 [Initial: Day Color: 07, NightColor: 05]
using the cellular phone.
.
1
1
.
31
Publicité
