ZANKER ZKH 7425 Informations A L'intention De L'utilisateur page 8

8 electrolux
Hotplate control knobs
The Control Knobs for the hotplates can be found on
the oven control panel. The energy regulator of the
hotplates can be set by means of a 7- position
control knob:
0 = Off
1 = Minimum
3 = Maximum
The intermediate positions give an increasing
heating power.
Double circuit cooking zone
If you wish to have the two electric circuits work
simultaneously, turn the knob to Max position
(3) and then turn it towards symbol "0". You will
hear a click. Now the 2 circuits work together.
Then, you can regulate the power of the cooking
zone by turning the control knob anticlockwise.
Safety Thermostat
To prevent dangerous overheating (through
incorrect use of the appliance or defective
components), the oven is fitted with a safety
thermostat, which interrupts the power supply. The
oven switches back on again automatically, when
the temperature drops.
Should the safety thermostat trigger due to incorrect
use of the appliance, it is enough to remedy the error
after the oven has cooled down; if on the other hand,
the thermostat triggers because of a defective
component, please contact Customer Service.
The cooling fan
The oven is provided with a cooling fan, meant to
keep the front panel, the knobs and the oven door
handle cool.The fan switches on automatically
when the oven is activated. Warm air is blown out
through the aperture near the oven door handle.
The fan switches off when, after cooking, the oven
function control knob is set to OFF position
8
Carefully supervise cookings with oil
or fats, since these types of food can
result in a fire, when over-heated.
0
.