CASO DESIGN VC 330 Manuel D'instructions page 41

Button Vacuum & Seal (Vakuum & Schweißen)
Air is drawn off from inside the bag (vacuuming), immediately after this process the bag is
sealed
Button Adjustable Vacuum (Vakuumstärke)
As long as you press the button, air is drawn off from inside the bag. When you release the
button, this process will stop. Afterwards you must seal the bag via the seal function.
Button Canister Vacuum (Vakuum Behälter)
Via the vacuum hose, air is drawn off from inside the vacuum canister
Button selectable welding time (trocken & feucht)
With this function you could adjust the welding time to the consistency of your vacuum
food. Choose "trocken" for dry vacuum food and "feucht" for moist vacuum food where
liquid is produced. Please choose the corresponding sealing time before the vacuum
process.
16.3 Rating plate
The rating plate with the connection and performance data can be founded on the bottom
of the unit.
17 Operation
This chapter provides instructions on the proper operation of your vacuum sealer:
17.1 Basics of sealing
After each sealing session and before starting up, check to make sure the unit and all
accessories are clean and free of leftover food. Follow the cleaning instructions on in
Chapter Cleaning and Maintenance.
Step 1: Open the lid and insert the open side of a compatible
bag into the clear plastic vacuum chamber.
Step 2: Press the cover down firmly on each corner of the top
cover until it locks into place with an audible click. To seal,
press the Seal Button. To vacuum and seal, press the
"Vakuum & Verschweißen" Button.
Step 3: Once the Sealing Indicator Light is no longer lit, press
the Cover Unlock Buttons to unlock the top cover.
41