CASO DESIGN VC 330 Manuel D'instructions page 40

Lift up the top cover. Underneath you'll find:
 Sealing Strip: Gold strip inside the top cover heats up to seal bags.
 Cutter: After pressing the Cover Unlock buttons, the Cutter will swing down into place for
cutting. Push it back into place until a click is heard to re-lock.
 Removable vacuum chamber. The open end of the bag must be placed inside the
chamber. This feature makes sure that air cannot escape from the bag and that excess
liquid is removed. Easy to remove and clean.
Please observe the following safety notice to reduce the risk of burns.
► Never touch the sealing bar while the unit is operating.
► Do not remove the Teflon tape (T).
16.2 Control Panel
Indicator lamps
A Indicator lamp Seal (Schweißen)
Indicates the sealing process of the bag without vacuum
B Indicator lamp Vacuum & Seal (Vakuum & Schweißen)
Indicates the Vacuum/sealing process
C Indicator lamp Adjustable Vacuum (Vakuumstärke)
Indicates the vacuum process
D Indicator lamp Vacuum Canister (Vakuum Behälter)
Indicates the vacuum process for the canister
E Indicator lamps Selectable welding time (trocken & feucht)
Indicates the welding time chosen either for dry (trocken) or moist (feucht) vacuum food.
Buttons
Stop button
You can stop the vacuum and sealing process at any time
Button Sealing function (Schweißen)
Seals a bag without first vacuuming
WARNING
Please note
40