Leckey Mygo Manuel De L'utilisateur page 25

The tie down straps must be tightened
firmly in accordance with the manufacturer's
specifications.
Note: The maximum angle of the front
tie-down straps (1) must be 60° and the
maximum angle of the rear tie-down straps
(2) must be 45° (Fig 23).
Fig 23
The vehicle restraint system's pelvic belt
and shoulder harness must be attached
in accordance with the manufacturer's
specifications and tightened as firmly
as possible.
If your seating system does not include
them and there is more than 30cm of space
in front of the occupant's feet, then it is
recommended that leg restraints be used to
keep the user's legs from extending.
Always ensure that restraint belts are
close to the body and are not distanced
from user's body by components such as
armrests or wheels.