Instructions For Securing The Leckey Tour Mobility Base In A Vehicle - Leckey Mygo Manuel De L'utilisateur

11 Instructions for securing
the Leckey Tour Mobility
Base in a vehicle
These instructions apply to the Leckey
Tour Mobility Base only. For all other
mobility bases please refer to the
manufacturer's instructions.
The wheelchair user must be seated in
an upright seating position in the seating
system.
Place the Leckey Tour Mobility Base in a
forward facing direction, centrally between
the tie-down rails on the floor of the vehicle,
then apply the brakes.
Loose parts must be secured separately in
the motor vehicle.
Check that the vehicle anchored restraint
system and the wheelchair restraint system
comply with the appropriate Standard.
Fig 21
Rotate the front wheels of the Leckey Tour
Mobility Base so that they are in a forward
facing direction in order to improve stability
of the unit (Fig 21).
The mobility base must be anchored to the
vehicle using tie-down straps. Ensure that
one end of the tie-down straps are securely
attached to the floor tracks. Attach the other
ends of the straps to the anchor points on
the Leckey Tour Mobility Base on the left/
right sides of the front frame (A) and at the
left / right sides of the rear frame (B). Refer to
figures 22a and 22b.
Fig 22a
Fig 22b
B
A
A
B