Leckey Mygo Manuel De L'utilisateur page 22

10.2 Adjustable Brake
Force for 12" wheel
To adjust the friction brake, please refer to
Fig 19a and 19b.
By reducing the distance between the
wheel lock friction post (A) and the wheel,
braking force is increased. In order to adjust
the brake, loosen the nuts (B), allowing the
wheel lock to slide. The wheel lock should be
adjusted so that when the wheel lock is not
activated, the distance between the wheel
lock friction post (A) and the tyre is 10mm.
After adjustment tighten the nuts (B). Ensure
the wheels lock when the brake is activated
after adjustment.
Ensure the locking/braking forces of both
wheels are adjusted equally.
Fig 19a Fig 19b
B
A