Troubleshooting - Graef MASTER M80 Mode D'emploi

Moreover, transport damage provided we are not
responsible shall be excluded from the claims
under guarantee. Guarantee shall be ruled out
for damage, the repair of which has not been
carried out by us or one of our represenations.

Troubleshooting

Problem
Slide moves sluggishly.
Blade moves slugglishly.
Grinding noise caused by
blade.
Operating noises increase
with increasing use.
20
Cause
Slide slide is dirty.
Cogwheels of the blade are not
greased or are dirty.
Food residues on the blade po-
tentially
Gear is not greased sufficiently.
In case of justified complaints, we shall repair
the defective product or replace it by a product
without defects at our discretion.
Clean and grease the slide
slide.
Undo and clean the blade; use
petroleum jelly to grease the
inside of the blade (cogwheel
of blade) and the black ring.
Remove, clean and grease the
blade.
Undo and clean the blade; use
petroleum jelly to grease the in-
side of the blade (cogwheel of
blade) and the black ring.
Solution