Function; Maintenance And Care; Replacing A Filter - Franke FAID100 Notice De Montage Et De Mise En Service

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11

14. Function

Stationary use
14.1 Press the trigger button.
• The water will flow.
• The safety cap will fall off.
14.2 Press the red stop button.
• The water flow will stop.
The fitting is not self-closing. The user can use both hands to keep their eyes open!
Mobile use
Depending on the length of the hose, the eye shower can also be pulled out of its
bracket.

15. Maintenance and care

Check once a month that the eye shower is in working order. (Guidelines for Labora-
tories BGI/GUV-I 850-0)
As a preventative measure to reduce microbiological contamination, it is recom-
mended to replace the water in the fitting at shorter intervals by opening the valve.
Use suitable cleaning agents which are not harmful to the fitting in a proper manner
and rinse with water after use. High-pressure cleaners must not be used for
cleaning.

16. Replacing a filter

FAR-Best.-Nr.:
2000101100
2000101101
2000105425
16.1 Close the water supply.
16.2 Loosen the cap nut (b).
16.3 Replace the filter (a).
Important!
Note the installation position of the filter.
The handle bar (d) must face forwards.
16.4 Reassemble in reverse order.
- 8 -

Publicité

Table des Matières
loading

Table des Matières