iwc AQUATIMER CHRONOGRAPH Mode D'emploi page 33

Adjusting the metal bracelet
If you have chosen a metal bracelet, you can easily adjust
it to the size of your wrist. You can make this adjustment
yourself by removing or adding individual bracelet links.
Taking the bracelet apart and removing
individual links
the securing pin (1) at the desired point of separation and,
at the same time, displace the pivot pin laterally by ap-
proximately 3 millimetres (2) with the second special tool.
Remove the bracelet from the case
as described and open the clasp by
pressing the button on the side. Lay
the bracelet with its top surface on a
firm base. Using the special tools
provided, you can now push down
Now pull the protruding pivot pin
from the bracelet (3). The metal brace-
let is now separated, and you can
adjust the length of the bracelet by
removing or adding individual links.
30 | 31