Operator; Intended Use - Carlo De Giorgi Electric Bistoury 645/00 Manuel D'utilisation Et D'entretien

ELECTRIC BISTOURY
Now unscrew and remove the head, insert the required type of electrode
and then refit the head, tightening it appropriately to ensure the best
possible electrical continuity between the parts.
If the electrode cannot be inserted into the collet, extract the collet from its
location and push in the electrode with force; when the electrode has
been inserted, refit the resulting assembly into the handpiece and then
refit the head as described above.
Always sterilize the handpiece and electrodes before use; the handpiece
is specifically designed for sterilization in an autoclave.
Always switch OFF the appliance after use by setting the main
power switch to "O".

4.2 - OPERATOR

The operator starts the appliance by means of a voluntary command via
the button on the handpiece or the control pedal, thereby assuming direct
control of its operation.

4.3 - INTENDED USE

The electric bistoury is designed for use in medical, dental and veterinary
surgeries for minor surgery and micro cauterization for brief and
intermittent interventions (20 seconds max.).
The appliance must not be employed for any uses other than those
specified by the manufacturer.
GB - 6 Carlo de Giorgi