Voluntary Compliance; Responsibilities Of The Customer; Requests For Service And Spare Parts; 2- Technical Features - Carlo De Giorgi Electric Bistoury 645/00 Manuel D'utilisation Et D'entretien

1.3.2 - Voluntary compliance

- CEI EN 60601-1 (1991) Electromedical appliances - Part 1 – General safety regulations.
- CEI EN 60601-2-2 (1993) Electromedical appliances - Part 1 - Special
regulations for the safety of high frequency apparatuses for electrosurgery.
- CEI EN 60601-1-2 (1991) Electromedical appliances - Part 1 – General safety regulations
- Supplementary standard: electromagnetic compatibility – Prescriptions and tests.

1.4 - RESPONSIBILITIES OF THE CUSTOMER

The user must install the appliance in a suitable place equipped with an
electrical system that complies with established legislation.
The appliance must be installed in a dry environment that is illuminated in
accordance with the requirements of established legislation.
NOTE: The expression "established legislation" refers to the laws in force in the user's
country.

1.5 - REQUESTS FOR SERVICE AND SPARE PARTS

For all electrical maintenance requirements, contact CARLO DE GIORGI
di Baranzate di Bollate, Via Tonale, 1.
In the case of faults, notify CARLO DE GIORGI technical personnel of the
exact nature of the problem, specifying also the lot number shown on the
label affixed to the rear of the appliance.

2- TECHNICAL FEATURES

Voltage
Frequency
Peak power consumption
Power output at 750
kHz/1500Ω
Delayed acting fuse T
Mass of the appliance
The appliance features double electrical insulation (Class II) and a
dedicated system protecting against stray currents and ground faults, with
particular regard for the ground electrode on the patient (LF type
appliance).
GB - 4
645/00
V 230/120
Hz 50/60
W 120
50 ± 20%
W
A 2X1.6 (230V)
3.15 (120V)
kg 4
ELECTRIC BISTOURY
Class II app.
Type BF app.
Carlo de Giorgi