Components; Operation And Use; Operation - Carlo De Giorgi Electric Bistoury 645/00 Manuel D'utilisation Et D'entretien

ELECTRIC BISTOURY

3 - COMPONENTS

The package contains:
a) power supply unit;
b) handpiece;
c) pedal;
d) cable with neutral cylindrical electrode;
e) case with n° 8 electrodes;
f) user instructions.
The appliance can be moved by hand without requiring lifting devices.

4 - OPERATION AND USE

4.1 - OPERATION

Set the power supply unit on a worksurface alongside the operator in such
a way that:
- it is in a stable position with no risk of falling;
- the handpiece lead is not subject to excessive traction, thus avoiding the
risk of breakage of internal wires or dragging of the power supply unit;
- the functional status of the appliance can be checked easily.
Connect handpiece (1) to connector (2) marked "active electrode" on the
front of the appliance;
Connect electrode (3) to cable (4), which must be inserted in the "plate"
socket (5) on the front panel; the appliance can be activated using the
button on the handpiece (1);
if you wish to activate the appliance using the pedal control (6), connect
the pedal cable to connector (7) on the rear of the appliance.
Finally, insert the power cord plug (8) into a mains socket outlet.
8
7
9
6
2
3
5
4
1
Fig. 1
Carlo de Giorgi GB - 5