cecotec CONGA 2690 Manuel D'instructions page 40

All manuals and user guides at all-guides.com
ENGLISH
* The Smart Area mode and de Spot mode are the only modes that can be activated in any of
the 3 previously created and saved maps.
7. CLEANING AND MAINTENANCE
Main brush
Turn the robot around and press the main brush's release button to take the cover out.
Take the main brush out and clean the compartment.
Clean the main brush with the provided tools and use water and soap if necessary.
Place the main brush in its position and fasten the cover's clip.
Note: Replace the main brush every 6-12 months to ensure efficient operating (depending on
the frequency and type of use).
Fig.25.
1. Main brush cover
2. Tab
3. Main brush
4. Compartment
Dust tank
Open the robot's cover and take out the dust tank.
Fig.26.
Open the dust tank, take the high-efficiency filter out and empty the dust.
Fig.27.
Clean high-efficiency filter with the cleaning brush.
Fig.28.
Introduce the dust tank back into the robot and close the top cover.
Fig.29.
High-efficiency filter
Fig. 30.
Remove the high-efficiency filter and shake it to remove all the dust.
Note:
Replace the high-efficiency filter every 3 months depending on the frequency and type of use.
Clean the filter periodically with a brush to avoid blockage.
Side brushes
Fig. 31.
40