cecotec CONGA 2690 Manuel D'instructions page 37

All manuals and user guides at all-guides.com
ENGLISH
neither will it resume cleaning or perform scheduled cleaning tasks.
Note: If any error occurs to the robot, the red indicator light will blink fast. Do not operate
the robot for 5 minutes, allow it to enter standby mode before operating it again. See the
troubleshooting section to solve the problem.
6. MOBILE APP AND WI-FI CONNECTION
In order to access all the robot's functions from wherever you are, it is suggested to
download the Conga 2000 App. You will be able to control the robot in the most efficient way,
enjoying the excellence of cleaning.
App advantages:
Control your robot in an easy and intuitive way.
Activate the cleaning process from any point.
Carry out settings and daily scheduling.
Choose between its different cleaning modes: Auto, Edge, Random, Twice, Scrubbing, Manual,
Back home, Spiral, Spot and Smart Area.
View how the robot creates an interactive map as it is cleaning.
Check the cleaned surface and the time taken.
Check the cleaning history.
Configuration:
Fig.24.
Download the Conga 2000 from App Store or Play store.
Create an account with your e-mail and a password.
Confirm login.
Add your Conga robot.
Connect to Wi-Fi.
Note:
The robot supports 5G networks.
The Wi-Fi name and password cannot exceed 32 bits.
If the network configuration fails to connect, follow the below steps:
Press the start button for 5 seconds, the robot will enter sleeping mode and the Wi-Fi light
indicator will blink fast indicating connection error. Retry connecting the robot again following
the steps in the before section.
If the connection fails again, check if:
The robot is too far away from the router.
The Wi-Fi password is incorrect.
37