Sony STR-DA4400ES Mode D'emploi page 37

Remove the cover.
C Audio/video cord (not supplied)
Function for conversion of video signals
This receiver is equipped with a function for converting video signals.
• Composite video signals can be output as HDMI video and component video signals.
• Component video signals can be output as HDMI video and video signals.
As the initial setting, video signals input from the connected component are output to the HDMI
OUT jack or MONITOR OUT jacks as shown in the table below.
We recommend you set the video conversion function to match the resolution of the monitor you
are using.
For details on the video converting function, see "
OUTPUT jack
INPUT jack
HDMI IN 1/2/3/4/5/6
VIDEO IN
COMPONENT VIDEO IN
a : Video signals are output.
– : Video signals are not output.
To the VIDEO 2 IN/
PORTABLE AV IN jacks
C
Note
Before connecting cords, make sure to disconnect
the AC power cord (mains lead).
Video settings" (page 113).
COMPONENT VIDEO
HDMI OUT
MONITOR OUT
a
a
a
Camcorder,
video game
MONITOR VIDEO OUT
–
a
a
continued
–
a
a
37 GB