Sony STR-DA4400ES Mode D'emploi page 128

Program the sequence of the
operation
RM SET
UP
Input
buttons
MACRO 1
MACRO 2
1
Press MACRO 1 or MACRO 2 for
more than 1 second while
pressing RM SET UP.
The RM SET UP button flashes and one
of the input buttons lights up (as the initial
setting, the VIDEO1 button lights).
2
Press the input button for the
component for which you want
to program the sequence of
operation(s).
128
GB
3
Press the buttons you want to
program in the same sequence
as you want the operation(s) to
be performed.
Press
N, x, X,
M, m,
., >
The input
button for more
than 1 second
MACRO 1 or
MACRO 2
The input button selected in step 2 flashes
twice, then lights up again.
4
Repeat steps 2 and 3 when you
want to program operations for
N, x, X,
other components.
M, m,
., >
5
Press RM SET UP to finish the
programming process.
Tip
If the RM SET UP button flashes five times in
step 1, and the macro programming process
does not start, replace the batteries with new
ones.
To cancel programming
Press RM SET UP. Also, not pressing any
button for 60 seconds cancels the settings.
The previous command remains valid.
Operations to be
programmed
Performs the operation
of the button.
Switches inputs.
Make a one second
interval. When you want
to make a longer
interval, press MACRO
1 or MACRO 2
repeatedly.