Sony STR-DA4400ES Mode D'emploi page 34

Connecting a DVD player, Blu-ray Disc Player
The following illustration shows how to connect a DVD player, Blu-ray Disc Player.
It is not necessary to connect all the cables. Connect audio and video cords according to the jacks
of your components.
Audio signals
A B
A Optical digital cord (not supplied)
B Coaxial digital cord (not supplied)
C Audio cord (not supplied)
* When you connect a component equipped with an
OPTICAL jack, set "Input Assign" in the Input
menu.
34
GB
DVD player, Blu-ray Disc Player
Video signals
C D
D Component video cord (not supplied)
E Video cord (not supplied)
Notes
• To output multi-channel digital audio, set the
digital audio output setting on the DVD player,
Blu-ray Disc Player. Refer to the operating
instructions supplied with the DVD player, Blu-ray
Disc Player.
• Before connecting cords, make sure to disconnect
the AC power cord (mains lead).
E