Using Your Printer With Macintosh Computers; System Requirements; Installing The Printer Driver - Sony DPP-SV88 Mode D'emploi

Using your printer with Macintosh computers

The supplied software enables you to print an image from your Macintosh
with the Digital Photo Printer DPP-SV88. To print an image from the
computer, you need a commercially available printing software application.

System requirements

To use the supplied software, you need a Macintosh computer that must meet
the following system requirements.
OS:
Port:
RAM:
Hard disk space:
Drive:
Notes
• We cannot guarantee the printer operations when a hub is used or when two or more
USB devices are connected to your computer.
• If you connect more than one DPP-SV88/SV77/SV55 printer at the same time, you
cannot operate the printer.
• You cannot operate the printer from another USB device being used simultaneously.

Installing the printer driver

Install the Sony DPP-SV88 Printer Driver Software for Mac OS 8.5.1/8.6/9.0/
9.1/9.2 Version 1.0 ("printer driver" in this manual) into your Macintosh.
1
Connect your Macintosh and the printer.
For the connections, refer to "Connecting to a computer (optional)" on
page 20.
2
Turn on the printer and start your Macintosh.
Note
Close all programs before running the installer.
GB
102
Mac OS 8.5.1/8.6/9.0/9.1/9.2 should be pre-installed.
A USB port should be installed as standard.
32 MB or more (64 MB or more is recommended.)
50 MB or more (depending on the number of copies to
be printed.)
CD-ROM drive (for software installation)