Publicité
Les langues disponibles
Les langues disponibles
CODE theft protection | Switching on and off
f Press the MENU 7 button, repeatedly if
necessary.
Entering the code number after a
voltage interruption
f Switch on the device.
The display first shows "CODE" and then
"0000". You can enter the code:
Note:
If you enter an incorrect code
number, "ERROR" appears on the
display, after which "0000" is shown
again. You can make the entry two
more times. After the third incorrect
entry, the device is locked for 1 hour.
During this time, the display shows
"BLOCKED". If you switch off the
device during this waiting period, you
will have to wait again for a full hour
after switching it on again.
f Enter the code number as described in the
section "Switching code query on/off".
f When the correct code number is shown
on the display, hold down the station
button 5 < for longer than 2 seconds.
The device will be switched on. "TIMESET" will
appear for about 2 seconds on the display,
after which the menu for entering the time will
open.
f Enter the time as described in the "Setting
the time" section of the "Time" chapter.
f Confirm the time you have entered by
pressing the SRC > key.
Once the time has been confirmed, the device
switches into normal operating mode.
Robert Bosch Car Multimedia GmbH
Switching on/off
There are various ways of switching the device
on/off:
Switching on/off with the On/Off
button
f Press the On/Off button 3 to switch on.
f To switch the device off, press and hold
down the On/Off button 3 for longer
than two seconds.
Note:
To protect the vehicle battery, the
device is automatically switched off
after an adjustable time period if the
vehicle ignition is switched off (see
the section "Adjusting the switch-off
time" in this chapter).
Switching on/off with microphone
If a microphone is connected to the device, the
device can be switched on and off with the
microphone for making announcements. For
further details read the "Microphone mode"
section in the "Adjusting the volume" chapter.
f Switch the microphone on while the
device is switched off.
The device automatically switches on and
allows you to make announcements over the
connected loudspeakers.
f Switch off the microphone.
The device switches off again.
Switching on/off via vehicle igni-
tion
If the device is connected to the vehicle's
ignition and you did not switch the device off
7 620 210 016 | 11.2013
en | 39
Publicité
