Whirlpool W11676973 Guide De Démarrage Rapide

YOUR QR CODE UNLOCKS
Product
registration
Product
guides
OPERATING INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS, located in your appliance's Owner's Manual, before operating this appliance.
Using Your Oven
Step 1.
Select oven function.
Step 2.
Set the temperature.
Step 3.
Press Start.
Step 4.
Place food inside the oven once set temperature is reached. Close the oven door.
Step 5.
(Optional) Enter time to cook.
Step 6.
The Cancel button can be used to cancel the function during or after cook time.
NOTE: For more detailed instructions on specific functions, see the online Control Guide.
Using Your Range
WARNING
Fire Hazard
Do not let the burner flame extend beyond
the edge of the pan.
Turn off all controls when not cooking.
Failure to follow these instructions can result
in death or fire.
Electric igniters automatically light the surface burners when
control knobs are turned to (Ignite).
BURNER SIZE
Select a burner that best fits your cookware. See the following illustration and chart.
Burner Size Recommended Use
Small
■ Low-heat cooking
■ Melting chocolate or butter
Medium
■ Multipurpose burner
Large
■ For large cookware
Oval
■ For longer dishes
W11676973A
Freestanding Gas Range Quick Start Guide
PRODUCT REGISTRATION AND OWNER INFORMATION
YOUR QR CODE UNLOCKS... product registration and warranty information, installation instructions, how-to videos, and additional accessories to
get the most out of your product. If you purchased a smart appliance, your QR code will provide instructions on how to download the app and
connect. You can access the full Installation, User Maintenance and Operating Instructions, Warranty details, and more by visiting our website at
www.whirlpool.com/owners or www.whirlpool.ca/owners. This may save you the cost of a service call. To receive a free printed copy of the
information online, call us at 1-866-698-2538 (U.S.A.) /1-800-807-6777 (Canada) or write to us at:
How-to
videos
Whirlpool Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022–2692
Troubleshooting
materials
Register to access warranty information and receive important notifications related to your product. Scan the Photo Registration Card or QR code to
register your product.
Before setting a control knob, place filled
cookware on the grate. Do not operate a
burner using empty cookware or without
cookware on the grate.
The flame should be adjusted so it does
not extend beyond the edge of the pan.
NOTE: Visually check that the burner has
lit. If the burner does not ignite, listen for a
clicking sound. If you do not hear the
igniter click, turn the burner off. Check for
a tripped circuit breaker or blown
household fuse. Check that the control
knob is pressed completely down on the
valve shaft. If the spark igniter still does
not operate, call a trained repair specialist.
To Set:
1. Push in and turn knob
counterclockwise to the Ignite position.
IMPORTANT: All four surface burners
will click. Only the burner with the
control knob turned to the Ignite
position will produce a flame.
2. Turn knob to anywhere between Hi
and Lo.
REMEMBER: When range is in use or (on
some models) during the Self-Cleaning
cycle, the entire cooktop area may
become hot.
POWER FAILURE
In case of prolonged power failure, the
surface burners can be lit manually. Hold a
lit match near a burner and turn knob
counterclockwise to the Ignite position.
After the burner lights, turn knob to setting.
Back of Range
Medium
Oval
Large
(on some
models)
Front of Range
OVEN VENT
The oven vent releases hot air and moisture from
the oven, and should not be blocked or covered.
Blocking or covering the oven vent will cause poor
air circulation, affecting cooking and cleaning
results. Do not set plastics, paper or other items that
could melt or burn near the oven vent.
POSITIONING RACKS AND BAKEWARE
IMPORTANT: To avoid permanent damage to the
porcelain finish, do not place food or bakeware directly
on the oven door or bottom.
Racks
■ Position racks before turning on the oven.
■ Do not position racks with bakeware on them.
■ Make sure racks are level.
To move a rack, pull it out to the stop position, raise the
front edge, and then lift out. Use the following
illustrations as a guide.
BAKING COOKIES AND LAYER CAKES ON TWO
RACKS
Baking Layer Cakes
For best results when baking cakes on two racks, use
the Bake function, a flat rack in rack position 4, and a
flat rack in rack position 2. Place the cakes on the
racks as shown. Keep at least 3" (7.6 cm) of space
between the front of the racks and the front cakes.
Baking Cookies on Two Racks
For best results when baking cookies on two racks, use the Convect Bake function and place flat racks
in positions 2 and 5.
ALUMINUM FOIL
IMPORTANT: To avoid permanent damage to the oven bottom finish, do not line the oven bottom with any
type of foil or liner.
For best cooking results, do not cover entire oven rack with foil because air must be able to move freely.
IMPORTANT: Do not allow aluminum foil and meat probes to contact heating elements.
OVEN LIGHT
The oven light is a 40 W halogen bulb. Before replacing, make sure the oven and cooktop are cool and
the control knobs are in the Off position.
To Replace:
1. Disconnect power.
2. Turn the glass bulb cover in the back of the oven counterclockwise to remove.
3. Remove bulb from socket.
4. Replace bulb, using tissue or wearing cotton gloves to handle bulb. To avoid damage to or
decreasing the life of the new bulb, do not touch bulb with bare fingers.
5. Replace bulb cover by turning clockwise.
6. Reconnect power.
IMPORTANT: Do not use lamps rated higher than 40 W.
SABBATH MODE:
The Sabbath Mode sets the oven to remain on the bake setting until disabled.
For guidance on usage and a complete list of models with Sabbath Mode, visit www.star-k.org or
contact us as per the information provided above.
Small
Large
Whirlpool Brand Home Appliances
Customer eXperience Centre Unit
200–6750 Century Ave.
Mississauga, Ontario L5N 0B7
A. Oven vent