Bosch HBL84 Mode D'emploi page 33

Oven Problem
Oven is not self-cleaning properly.
Clock and timer are not working
properly.
"E" and a number appears in display
and control beeps.
With a new oven there is a strong
odor when oven is turned on.
Control does not react when a button
is touched.
Warm air or steam escapes from oven
vent.
Cooling fan runs even when the oven
is turned off.
Possible Causes and Suggested Solutions
Allow the oven to cool before running Self Clean. Always wipe out loose soils or
heavy spillovers before running Self Clean. If oven is badly soiled, set oven for
the maximum Self Clean time.
Make sure there is electrical power to oven.
This is a fault code. Press any key to stop beeping. Reset oven if necessary. If
fault code remains, record fault code, turn off oven, and call authorized service
technician.
This is normal with a new oven and will disappear after a few uses. Operating
the Self Clean cycle also "burns-off" the smell more quickly.
Be sure that surface is clean and dry. Touch the center of the button. Use the
flat part of your finger.
It is normal to see or feel steam or warm air escaping from the oven vent. Do
not block the vent.
This is normal. The cooling fan will continue to run, even after the oven has
been turned off, until the oven has cooled sufficiently.
English 30