Bosch HBL84 Mode D'emploi page 29

Part
Stainless Steel Always wipe or rub in the direction of
Surfaces the grain. Clean with a soapy
sponge, then rinse and dry, or wipe
with Fantastik® or Formula 409®
sprayed on a paper towel. Protect
and polish with Stainless Steel
Magic® and a soft cloth. Remove
water spots with a cloth dampened
with white vinegar.
Do not use any abrasives such as
steel wool pads, Softscrub®, or
BonAmi©.
Chlorine or chlorine compounds in
some cleaners are corrosive to
stainless steel. Check ingredients on
label before using.
Plastic & When cool, clean with soapy water,
Controls rinse and dry.
Do not use any abrasives such as
steel wool pads, Softscrub®, or
BonAmi©.
Probe Wipe with soapy water. Do not
submerge. Do not wash in the
dishwasher.
Printed Areas Do not use abrasive cleansers.
(Words and
When cool, clean with soapy water,
Numbers)
rinse, dry.
Maintenance
Replacing an Oven Light
9 WARNING
• Make sure the appliance and lights are cool and
power to the appliance has been turned off
before replacing the light bulb(s). Failure to do
so could result in electrical shock or burns.
• The lenses must be in place when using the
appliance.
• The lenses serve to protect the light bulb from
breaking.
• The lenses are made of glass. Handle carefully
to avoid breaking. Broken glass could cause an
injury.
• Light socket is live when door is open.
Recommendations
Bulb specifications:
Oven Width
Description
27 inch 25 Watt,
25WPRE14,
800 HBN Series
European base
Ovens
30 inch 40 watt,
appliance bulb,
800 HBL Series
standard
Ovens
Edison base
To change the bulb:
Bulb Bulb Image
1. Turn off power to the
oven at the main
power supply (fuse or
breaker box).
2. Remove the glass
cover by unscrewing
it. Turn the glass
counterclockwise to
remove it.
3. Remove the bulb. The
bulb unscrews
counterclockwise.
4. Grasp the new bulb
with a clean, dry cloth
to prevent depositing
skin oils on the glass
which could lead to
premature bulb failure.
Replace the bulb by
screwing it in turning
the bulb clockwise.
5. Screw the glass cover
back on.
6. Turn power back on at
the main power supply
(fuse or breaker box).
English 26