KitchenAid 720-0826 (LP) Instructions D'installation Et Guide D'utilisation Et D'entretien page 15

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Attach Left Side Shelf
1.
Remove the 4 screws, assemble the left shelf panel
to the left shelf by locking the 4 screws.
2. Remove the 3 screws on the side shelf, left.
3. Loosen but do not remove the 2 screws on the side
panel, left (A). Remove the screw on main control
panel (B).
A
B
4.
Align the bottom keyhole slots on the side shelf, left
with the loosened screws. Hook the side shelf, left onto
the two loosened screws and let the shelf slide down so
the screws are in the narrow neck of the slots, Tighten
these two screws, see below (A)
5.
Attach 3 screws from firebox inside to side shelf, and
tighten, see below (B).
6.
Attach the side shelf, left to the main control panel by
inserting the screw and the washer which was removed
from Step 2 and tighten, see (C) below.
A
IMPORTANT: This step is meant to help with the
installation, but do not depend solely on the two
screws to hold the weight of the side
shelf.
B
C
15

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

730-0826(ng)

Table des Matières