Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5.
Attach the top of the side burner shelf to the grill firebox
by inserting three screws into the side burner shelf from
inside the grill firebox and tighten. See (A) below.
6.
Attach the bottom of the side burner shelf to the side
panel of the grill by tightening the two screws inserted
panel of the grill by tightening the two screws inserted
in the keyhole slots in Step 3. See (B) below.
7.
Attach the right side burner shelf to the control panel by
inserting the screw and the washer which were
removed from step 3 and tighten, see (C) below.
A
8.
Attach side burner orifice brass connector to side
burner tube with preassembled brass screw then
tighten by wrench.
A
A.
Side burner orifice brass connector
B.
Side burner tube
14
9.
B
10. Loosen but do not remove the 2 screws on the valve
B
Connect side burner igniter wire to underside of side burner.
A
A.
Side burner igniter wire from grill
B.
Side burner ignition pin
bracket, then lock the 2 screws.
B
Publicité
Table des Matières
