General Information - Tekno Point PICCOLO 12 Manuel D'installation

1. GENERAL INFORMATION

1.1 SYMBOLOGY
Within this publication and / or inside the equipment we used the following symbols:
USER: Information, paragraph, chapter
U
Manual affecting the user or the user.
INSTALLER:
INS
section of the manual that affect the
installer.
TECHNICAL ASSISTANCE CENTRE:
CAT
Information, paragraph, chapter of the
manual that affect the service center.
IMPORTANT: Calls attention to technical
information and practical advice that
make possible a more efficient use and
economical equipment.
OBLIGATION: Calls attention to actions
that impose an obligation in order to obtain
the correct functioning of the machine.
1.2 USE ALLOWED
These appliances have been designed for cooling of the
air. A different application, unless expressly authorized by
Tekno Point, is to be considered improper and therefore not
permitted.
Tekno Point excludes all contractual and non-contractual
liability for damage caused to people, animals or things
by incorrect installation, adjustment and maintenance,
improper use or as a partial or superficial reading of the
information contained in this manual. In addition, the ongoing
improvements of the products, reserves the right to change
the data in any time and without notice and is not responsible
for any inaccuracies contained in this document, if due to
printing or copying errors.
Please read this file, the execution of all work must be
performed by qualified and experienced personnel,
knowing the rules in force in different countries.
4
Information, paragraph,
WARNING: Calls attention to actions that,
if not correctly performed, may cause
serious injury.
PROHIBITION: Calls attention to actions
that impose a ban.
VOLTAGE WARNING: Calls attention to
actions that, if not carried out correctly, can
cause serious injury or death to exposed
persons.
DANGER HIGH TEMPERATURES: Calls
attention to actions that, if not correctly
performed, may cause serious personal
injury caused by the high temperature of
the components.
The guarantee is invalidated if they do not meet the
above mentioned directions.
The documentation supplied with the unit must be delivered
to the end customer (user) who should keep it carefully for
future maintenance or service.
Upon delivery of the goods by the carrier, check the
integrity of the packaging is that the units. Should you find
any damage or lack of components, indicate this on the
delivery note to the unit's receipt: please make an all-party
control, in order to verify that the transport did not cause
damage, the damage may be present must be communicated
to the carrier, adding the clause reserves on the transport
document, specifying the type of damage, also inform, by fax
or registered mail within 8 days from the date of receipt of
goods, a formal complaint to the company.
36
U INS CAT