Publicité
Les langues disponibles
Les langues disponibles
Assembly
1) Using CA glue, attach the supports of the landing gear
to the fuselage as shown; about 11 cm (4.3") from the
fuselage's front end. (Illustration). Make sure that the
single drill hole at the tail end of the tube is pointing
downward.
Drilling
2) Attach the forward supports to the landing-gear struts
and the fuselage.
Landing gear support
Here stick
Fuselage
3) Insert the wood/wire axle combination through the
corresponding hole provided in the landing gear struts.
Here
Stick
Strut
All manuals and user guides at all-guides.com
Wing owner
11cm
Bracing
4)Continuing, insert the axle through the second
landing-gear strut. Glue the axle securely to the struts.
Axle/Wire
5) Insert and securely glue the tail skid and struts which
will later support the cockpit/gondola.
First stick...
6) Attach the cockpit/gondola with Styrofoam glue.
Ca.. 80 mm
tail skid
Suspension
Publicité
