Publicité
Les langues disponibles
Les langues disponibles
HOW TO USE THE MACHINE
3. Do not start mowing if the blade vibrates or if you are unsure whether they are
sharp enough. Always remember that:
– A badly sharpened blade pulls at the grass and causes the lawn to turn yellow.
– A loose blade causes unwanted vibrations and can be dangerous.
WARNING!
ing safely or efficiently. If in doubt, contact your Dealer immediately to make
the necessary checks and repairs.
5.2
USING THE MACHINE
5.2.1 Starting
DANGER!
ventilated area! ALWAYS REMEMBER THAT EXHAUST GASES ARE TOXIC!
Before starting the engine:
– open the fuel stopcock (1) (where supplied),
which you can reach from the left-hand rear
wheel arch;
– put the gear lever (
models) or the speed change lever pedal
(
for hydrostatic drive models) into neutral
(«N»);
– disengage the blade;
– on slopes, engage the parking brake:
Afterwards:
– put the accelerator lever to «CHOKE», as shown on the label, if the engine is cold. If
the engine is already warm, put the lever between «SLOW» and «FAST»;
– put in the key and turn to «ON» to make electrical contact, then turn to «START» to
start the engine. Release once the engine has started.
When the engine is running, put the accelerator into the «SLOW» position.
All manuals and user guides at all-guides.com
Do not use the machine if you are unsure whether it is work-
All starting operations have to be effected in an open or well
for mechanical drive
19
EN
1
Publicité
