Sabo 72-12 HF Livret D'entretien page 51

UNPACKING AND ASSEMBLY
3. UNPACKING AND ASSEMBLY
For storage and transport reasons, some components of the machine are not directly
installed in the factory, but have to be assembled after their removal from the packing.
Final assembly is carried out by following these simple instructions.
IMPORTANT
or fuel. Before starting up the engine, fill with oil and fuel following the instructions
given in the engine booklet.
WARNING!
a flat and stable surface, with enough space for machine handling and its
packaging, always making use of suitable equipment.
3.1 UNPACKING
When unpacking the machine, take care to gather all individual parts and fittings, and
do not damage the cutting deck when taking the machine off the base pallet.
The standard packing contents:
– the machine;
– the battery;
– steering wheel;
– seat;
– grass-catcher components;
– an envelope containing the instruction manual, documents and the nuts and bolts
with two starter keys, a pin for blocking the steering wheel and a spare 10 Ampere
fuse.
Disposal of the packaging should be done in accordance with the local regulations in
force.
3.2 ASSEMBLY AND CONNECTING THE BATTERY
Remove both the rear column cover (1) fastened with two screws (2) and the front col-
umn cover (3) fastened with another two screws
(4).
Fit the battery (5) in place and secure it with the
bracket (6) and the nut (7).
Connect the three red cables (8) to the positive
terminal (+) and the three black cables (9) to the
negative terminal (–) using the screws supplied.
All manuals and user guides at all-guides.com
For transport reasons the machine is supplied without engine oil
Unpacking and completing the assembly should be done on
2
1
4
9
EN
3
4