Connection (For Mex-N5100Bt); Connection (For Mex-N4100Bt) - Sony MEX-N5100BT Mode D'emploi

Connection
(For MEX-N5100BT)

*1 Not supplied
*2 Speaker impedance: 4 – 8 Ω × 4
*3 RCA pin cord (not supplied)
*4 Depending on the type of car, use an adaptor for a
wired remote control (not supplied).
*5 Whether in use or not, route the microphone input
cord such that it does not interfere with driving
operations. Secure the cord with a clamp, etc., if it is
installed around your feet.
* 2
See "Power connection diagram" (page 31)
for details.
*6 For details on installing the microphone, see
*7 Depending on the type of car, use an adaptor (not
* 3
* 3
* 3
from a wired remote control
(not supplied)*
from a car antenna (aerial)*
"Installing the microphone (MEX-N5100BT only)"
(page 32).
supplied) if the antenna connector does not fit.
Subwoofer*
Power amplifier* 1
4
For details, see "Making
connections" (page 31).
*
5
7
29
1
6
*
GB