InnoCigs CUBOID PRO Manuel D'utilisation page 65

INNOCIGS CUBOID PRO – REGULATING THE POWER OUTPUT & TEMPERATURE
General Operation to control the Power and Temperature Output
The device has a power range of 1 to 200 watts. Changing the wattage will also change the taste and the vapor behavi-
or. The higher the wattage is set, the more intense the vapor development will be. The same is true for the temperature
control: the higher the temperature, the greater the vapor development. Press and hold the Up or Down key to auto-
matically increase or decrease the number of watts or temperature.
Switching between °C and °F
The temperature can be set between 100 and 315°C or 200 to 600°F in TCR mode. Use the "Up" or "Down" buttons to
increase or decrease the temperature. Press and hold down the settings buttons to set the value faster.
63