Switching Between Operating Modes - InnoCigs CUBOID PRO Manuel D'utilisation

INNOCIGS CUBOID PRO – OPERATING & CHANGING THE VAPING MODES

Switching between Operating Modes

Tap the cloud icon at the top right to switch between the modes VW, VT (Ni, Ti, SS) and TCR (M1, M2, M3).
Set the Values
- In VT / TCR mode, press the Up or Down button to adjust the temperature. Press the Tap button briefly to confirm.
Then the unit returns to the power mode display.
1. Note: VT / TCR mode supports a resistance value of up to 1.5 Ohm. The unit automatically switches to the VW
mode, if the resistance value should be higher.
2. If VT is used in the VT / TCR mode, the unit will automatically switch to the VW mode.
- The TCR function allows you to individually fine-tune your VT heads (Ni, Ti, SS). Select M1, M2 or M3 to set the
appropriate setting.
65