Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INNOCIGS CUBOID PRO – USING THE DEVICE
Operating Instructions
Please fully charge the 18650 batteries before initial use of the Cuboid Pro. Use the device with a suitable clearomizer of your choice.
We recommend high-drain 18650 cells with rated discharge current ≥ 25A. Please be careful about the positive and negative signs
(+/-) on the battery cover. Use the device with a sub-ohm suitable, 510 threaded clearomizer of your choice.
Tips for Cleaning
Use a dry cloth or cotton swab to clean the clearomizer.
Power On/Off
Press the fire button five times in rapid succession to turn the unit on and five times to turn it off again. We recommend that you
switch off your device during transport and during long periods of non-use.
Vaping
Please select the correct operating mode and set a suitable wattage for your atomizer head. While holding the fire button of your
e-cigarette, inhale the vapor slowly and continuously through the mouthpiece of your clearomizer. Release the fire button while
exhaling the vapor.
59
Publicité
Table des Matières
