Publicité
Les langues disponibles
Les langues disponibles
•
Under no circumstances may the design
of the attachment be modified without
the permission of the manufacturer. Do
not use an attachment that appears to
have been modified by others and always
use original accessories. Non-authorized
modifications and/or accessories can result
in serious personal injury or the death of
the operator or others.
Save all warnings and instructions
for future reference
Safety instructions for operation
•
If you encounter a situation where you
are uncertain how to proceed you should
ask an expert. Contact your dealer or your
service workshop.
•
Avoid all usage which you consider to be
beyond your capability.
•
Cutting tool. Do not touch the tool without
first, switching off the engine/remove the
battery.
•
Never allow children to use the product.
•
Ensure that no-one comes closer than 15
m while you are working.
•
Never allow anyone else to use the
product without first ensuring that they
have understood the contents of the
operator's manual.
•
Never work from a ladder, stool or any
other raised position that is not fully
secured.
•
Always ensure you have a safe and stable
working position.
•
Always use both hands to hold the product.
Hold the product at the side of your body.
1917 - 003 - 03.11.2023
•
Make sure that you connect the harness
to the support hook. Only use a single
harness.
•
Use your right hand to control the throttle/
power trigger .
•
If an emergency occurs, let go of the
product and let it fall to the ground.
•
Make sure that your hands and feet do not
come near the cutting attachment when
the engine/motor is running.
•
When the engine/motor is switched off,
keep your hands and feet away from the
cutting attachment until it has stopped
completely.
•
Watch out for stumps of branches that can
be thrown out during cutting.
•
Always lay the product on the ground when
you are not using it.
•
Do not cut too close to the ground. Stones
and other objects can be thrown out.
•
Check the working area for foreign objects
such as electricity cables, insects and
animals, etc, or other objects that could
damage the cutting attachment, such as
metal items.
•
If any foreign object is hit or if vibrations
occur, stop the product immediately. If
you have a gasoline operated product,
disconnect the spark plug cap from the
spark plug. If you have a battery operated
product, remove the battery. Check that
the product is not damaged. Repair any
damage.
•
If anything jams in the blades while you
are working, stop the product immediately.
If you have a gasoline operated product,
switch off the engine and disconnect the
5
Publicité
