Husqvarna HA322 Manuel D'utilisation page 2

Introduction............................................................... 2
Safety........................................................................3
Assembly.................................................................. 8
Product description
We have a policy of continuous product
development and therefore reserve the right
to modify the design and appearance of the
products without prior notice.
Intended use
WARNING:
may only be used together with
Attachment overview for HA322
2
1
1. Transport guard
2. Cutter
3. Grease nipple and plug for filling lubricant
(transmission housing)
4. Shaft
5. Harness
6. Harness support hook
7. Hex key
8. Angle adjustment handle
9. Angle adjustment lever
10.Grease nipple and plug for filling lubricant
(gear housing)
2
Contents
Introduction
This attachment
3
4
Operation.................................................................. 8
Maintenance........................................................... 10
Technical data.........................................................11
the intended product, see the
accessory chapter in the Operator's
Manual of the product.
The product is only designed for cutting
branches and twigs.
9
8
5
11
6
11.Bevel gear housing
12.Operator's manual
Symbols on the attachment and the
power unit
Careless or incorrect use of this
product can result in serious or
fatal injury to the operator or
others.
10
12
7
1917 - 003 - 03.11.2023