Télécharger Imprimer la page

Hartan Racer GT Manuel D'instructions page 18

Masquer les pouces Voir aussi pour Racer GT:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
All manuals and user guides at all-guides.com
Instructions
Unfolding the pram
By pushing the lock buttons 4, unfold the upper section to bring the handle
in horizontal position. Pull handle 1 upwards until handle catch 2 has
WARNING!
engag ed.
Before using the pram, make sure all catches
are locked.
Folding the pram
Turn safety turn-lock 3 inward until the handle's catch 1 has released.
Push handle downwards to fold the pram. By pushing the lock buttons 4,
fold the handle's upper section inward.
WARNING!
We recommend proceeding with caution when folding and
unfold ing the chassis, and adjusting the backrest, as there is a risk that
you do yourself an injury such as jamming your limbs, fingers, etc.
Height adjustment of handlebar
Press the two handle-folding lock buttons 4 to bring the upper section of
the handlebar 1 in the desired position.
Changing of wheels
Release the parking brake. Push the button 5 to release the retention, and
pull off the wheel. Push the wheel right to the axle's stop, then depress
the button. Make sure, all wheels are held in place properly.
Lock-type-swivel wheels
Turn the cap 6 so that the red point is visible to pre-select the straight-
line motion mode, which will be activated the moment the wheels point
in forward direction. Turn the cap 6 so that the green point is visible
to release the swivel lock. To remove the wheel, release the push-button
in the centre of the cap 6 and pull the wheel off the holding device.
To assemble the wheel, insert the fastening pin in the holding device,
and depress the push-button inside the
cap, which is indicated by a click sound.
Making the swivel wheel attachment
ready for use
Make sure the fastening pin is inserted
completely and the pushbutton is closed.
14

Publicité

loading