Télécharger Imprimer la page

TechniSat DIGITRADIO Bike 1 Manuel D'instructions page 55

Masquer les pouces Voir aussi pour DIGITRADIO Bike 1:

Publicité

Les langues disponibles

Les langues disponibles

Only clean the display with a soft cotton cloth. If necessary, use a cotton cloth
with small amounts of non-alkaline, diluted water- or alcohol-based soapy water.
Rub the cotton cloth gently over the surface.
12 Eliminate errors
If the device does not work as intended, check it using the following table.
Symptom
Device cannot be switched on.
No sound can be heard.
The display does not switch on.
Possible cause/remedy
The device is not supplied with power. Connect
the power adapter correctly to the socket and to
the device. Charge the battery.
Increase the volume.
Disconnect the appliance from the mains and
reapply power.
55

Publicité

loading