Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Kettensaege_Elektro_302128.book Seite 54 Donnerstag, 5. Januar 2017 4:59 16
GB
trade literature. We recommend that you
attend suitable training sessions. The notes
here serve only as a complement!
Correct posture
DANGER! Risk of injury! Never
work on unstable subsurfaces!
Never work above shoulder height!
Never work while standing on a lad-
der!
Do not work bent too far forward!
Only use the device under favourable
weather and site conditions!
– Stand with both legs securely on the
ground.
– Heed obstacles in the work area.
– While you are working, always hold the
device fast with both hands!
Hold the device:
– with the left hand on the handle.
– with the right hand on the handle.
– balanced in a secure position.
Here's how to saw correctly!
DANGER! Risk of injury! Always
switch the motor off before you put
the device down!
• Search the work area and remove objects
which are in your way.
• When you begin work, check the safety of
the device (► Check before starting! –
p. 53).
• Take the device in both hands as
instructed.
Risk of rebound!
Rebounds occur if the upper edge or tip of
the saw rail touch wood or other hard
objects. The device is thrown with high
energy back and forth, which can cause
extremely severe injuries.
DANGER! Risk of injury! When
working with the device, dangerous
rebounds may occur! Severe or even
fatal injuries can be the result! Before
beginning work with the device, the
chain brake must be checked to
ensure that it is functioning correctly.
54
Avoid letting the area of the saw rail depicted
on the right touch wood or other hard
objects.
In order to reduce the risk of injury in case of
a rebound, the device is equipped with a
chain brake which is triggered automatically
on impact and which stops the saw chain
immediately.
For safety reasons, the functionality of the
chain brake must be checked each time the
device is used (► Checking the chain
brake – p. 52).
With less strong rebounds, it can happen
that the chain brake is not triggered automat-
ically. For this reason it is important that the
device be held fast with both hands.
Only a careful and correct working method
can reduce the risk of a rebound reliably!
Basic work technique
DANGER! Risk of injury! This sec-
tion treats the basic work technique
when handling the device. The infor-
mation provided here does not
replace the many years of training
and experience of a professional.
Do not perform any work for which
you are not sufficiently qualified!
Thoughtless handling of the device
can cause severe or even fatal inju-
ries!
Before each use
1. Check the chain brake to ensure it is
functioning correctly.
2. Check the rear hand guard for damage.
3. Check the switch-on safety lock and start
button to ensure they are functioning cor-
rectly.
4. Check whether all handles are free of oil.
5. Check whether all parts of the device are
present, firmly attached and undamaged.
6. Check the chain catcher for damage.
7. Check the chain tensioning.
Sawing technique
Pulling sawing
Publicité
