DeWalt DWE4057 Traduction De La Notice D'instructions Originale page 48

ENGLISH
WARNING: To reduce the risk
of serious personal injury, turn
tool off and disconnect tool from
power source before making any
adjustments or removing/installing
attachments or accessories. Bewfore
reconnecting the tool, depress and
release the trigger switch to ensure that
the tool is off.
Pop-off Brushes
The motor will be automatically shut off indicating
that the carbon brushes are nearly worn out and
that the tool needs servicing. The carbon brushes
are not user-serviceable. Take the tool to an
authorised D WALT repair agent.
E
Lubrication
Your power tool requires no additional lubrication.
Cleaning
WARNING: Blow dirt and dust out of
the main housing with dry air as often as
dirt is seen collecting in and around the
air vents. Wear approved eye protection
and approved dust mask when
performing this procedure.
WARNING: Never use solvents or
other harsh chemicals for cleaning the
non-metallic parts of the tool. These
chemicals may weaken the materials
used in these parts. Use a cloth
dampened only with water and mild
soap. Never let any liquid get inside the
tool; never immerse any part of the tool
into a liquid.
Optional Accessories
WARNING: Since accessories, other
than those offered by D
been tested with this product, use of
such accessories with this tool could be
hazardous. To reduce the risk of injury,
only D WALT recommended accessories
E
should be used with this product.
Consult your dealer for further information on the
appropriate accessories.
46
D
D
b
D
Protecting the Environment
that can be recovered or recycled reducing the
demand for raw materials. Please recycle electrical
products and batteries according to local provisions.
Further information is available at www.2helpU.
com.
WALT, have not
E
Max. Min.
[mm]
Rotation
[mm]
[min. -1
D b d
d
115 6 22,23 11,800
125 6 22,23 11,800
b
115 - - 11,800
125 - - 11,800
d
75 30 M14 11,800
D
115 12 M14 11,800
125 12 M14 11,800
Separate collection. Products and
batteries marked with this symbol must
not be disposed of with normal
household waste.
Products and batteries contain materials
Periphical Threaded
speed hole length
] [m/s] [mm]
80 -
80 -
80 -
80 -
45 16.0
80 16.0
80 16.0